|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
 ;
Complete and very useful. Could have benefited from a little higher resolution on the schematic and layout diagrams for improved legibility.
;
Great Service Manual, Very Complete, as advertised, Perfect, Thanks!
;
Good quality service manual.It has helped me to fix my FV1800,particularly for replacing the dial cord.The scheme is on A3 format and very readable.Thank.Olivier.
;
This manual is complete and very readable.It was a great help for my two ICF5800L.The first one had the dial cord broken,and without the service manual it is impossible to replace it.Thank.Olivier.
Alignment and Adjustments
1-1-2 Suggested adjustment methods (DVI, PC: MSPG-925LTH 640x480@59.94Hz, Video & RF: MSPG-925LTH, PAL-BDGHI 780x576@50Hz)
1-1-2(A) ADJUSTMENT OF DVI WHITE BALANCE
1. Adjust the timing to �MSPG-925LTH 640x480@59.94Hz� and load the Samsung White Balance Pattern. 2. Enter into Factory Mode. Select 6.SNI for brightness control. Adjust the High Light with 01.Contrast Offset, and set to 00. Set Low Light to �Bright offset� 3. To adjust the Color Coordinate select 9. LOGIC. Select 00.R Drive and 02.B Drive to adjust the High Light Color Coordinate. Keep the 01.G-Drive set at the default value. Adjust 03. R Cutoff and 05. B Cutoff to adjust the Low Light Color Coordinate. Keep the 04. G Cutoff set at the default value.
1-1-2(B) ADJUSTMENT OF PC WHITE BALANCE
1. Adjust the timing to �MSPG-925LTH 640x480@59.94Hz� and load the 16Gray ramp pattern. ...Execute [07. Auto Gain] while in Factory Mode 7.AD9883. /The position and pixel clock must be accurately adjusted before making the Analog Auto adjustment.\ 2. Adjust the timing to MSPG-925LTH 640x480@59.94Hz, and load the Samsung White Balance Pattern. Select 6.SNI for brightness control. Adjust the High Light with the 01.Contrast offset. And set it to 00. Set the Low Light to �Bright offset� 3. To adjust the Color Coordinate, select 9. LOGIC. Select 00.R Drive and 02.B Drive to adjust the High Light Color Coordinate. Keep the 01.G-Drive set at the default value. Adjust 03. R Cutoff and 05. B Cutoff to adjust the Low Light Color Coordinate. Keep the 04. G Cutoff set at the default value.
1-1-2(C) ADJUSTMENT OF VIDEO (CVBS) & RF WHITE BALANCE
1. Adjust the timing to �MSPG-925LTH 640x480@59.94Hz� and load the Samsung White Balance Pattern. (Use the UHF C21 Toshiba Pattern if it°�s adjusted with a RF signal instead of MSPG-925LTH) Set the Digital NR to Picture [On] in the menu. 2. Enter into Factory Mode. �Select 6.SNI for brightness control. Adjust the High Light with the 01.Contrast offset, and set to 00. Set Low Light to �Bright offset�. 3. To adjust the Color Coordinate, select 9. LOGIC. Select 00.R Drive and 02.B Drive to adjust the High Light Color Coordinate. Keep the 01.G-Drive set at the default value. Adjust 03. R Cutoff and 05. B Cutoff to adjust the Low Light Color Coordinate. Keep the 04. G Cutoff set at the default value.
1-2
Samsung Electronics
|
|
|
> |
|
