This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Fast and courteous service. Product delivered as described. Thank you.
Text excerpt from page 22 (click to view)
Appliance dimensions
DA 326-1 i
DA 329-1 i *
1) The slot for the active charcoal filter must be accessible if the hood is being used in recirculation mode. 2) The rear panel of the cabinet may have to be removed for these dimensions to be applicable. (See built-in depth of the upper cabinet). 3) DFB light shield (optional accessory)
To ensure that the exhaust ducting can be installed on the exhaust connection easily, the upper cabinet must be at least 18 1/8" (460 mm) high. *The DA 329-1 i can also be built into a 23 5/ " (60 cm) cabinet. (See upper
8
cabinet measures for DA 326-1 i). In this case, the lower portion of the hood will overlap the bottom cabinets on either side.