|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The Service Manual was just as expected, complete with schematics and I was able to download it in less than an hour after I ordered it. The only problem with these is that the schematics are hard to read due to the small font. I could remedy this by printing them on a larger printer.
 ;
Very fast, clear and usefull site !
Also this Service Manual are very well maked and with a very good definition !
Very fast download speed !
Recomended Seller !
;
The manual you sent me was excellent. It included clear, readable diagrams and a usable parts list. I would surely use your service again. Thanks
;
Payments were processed quickly and items were exactly as described. I will use owner-manuals.com in the future for any other manual needs.
;
The Technics manual was very clear and I was able to solve my technical problems.
I did not think that anyone kept these manuals and was pleasantly surprised to find them on the Internet and at an affordable price.
I would recommend Owner Manuals as a first source of technical products for ‘dated’ equipment manuals.
Ian
DV MECHANICAL ADJUSTMENT MANUAL VII
3-24.Conversion Gear
1.
1) 2)
Removal procedure
Remove the belt 1 from the conversion gear. Remove the conversion gear 2 from the conversion gear shaft.
2.
1) 2) 3)
Attachment procedure
Apply grease to the conversion gear shaft. Amount of grease: a ball of grease of 1.0 mm diameter Install the conversion gear 2 in the conversion gear shaft. Hook the belt 1 on the conversion gear in a slant angle and install it by rotating the conversion gear with fingertip.
BELT Key Points in Re-assembling
2 Conversion gear
Hook the belt 1 on the conversion gear in a slant angle. Do not remove the capstan motor assy.
1 Belt
The belt must not be twisted.
Conversion gear shaft
Apply Grease Points to be noted
Apply grease when installing it. Amount of grease: a ball of grease of 1.0 mm diameter Apply grease Conversion gear shaft
The belt must not override on the capstan motor block assy.
� The belt must not override on the capstan motor block assy. � When installing the belt, the belt must not have any twisting, dust, scar or grease must not be splashed on belt.
� 35 �
|
|
|
> |
|
