|
There are currently no product reviews.
 ;
OEM manual provided all schematics, board layouts and component specs necessary to facilitate unit maintenance. All pages were clear and readable.
;
Good condition and quality. Hard to find anywhere in Internet, only on this site.
 ;
Exactly what I needed to be able to bring the amp back to life... will come back to this site the next time I need schematics.
;
Information was accurate and very helpful.
However the continuity made it a little difficult to follow from one page to the next.
;
Very very good as usual very trustable site. Perfect!!!!!!
DV MECHANICAL ADJUSTMENT MANUAL VII
3-24.Conversion Gear
1.
1) 2)
Removal procedure
Remove the belt 1 from the conversion gear. Remove the conversion gear 2 from the conversion gear shaft.
2.
1) 2) 3)
Attachment procedure
Apply grease to the conversion gear shaft. Amount of grease: a ball of grease of 1.0 mm diameter Install the conversion gear 2 in the conversion gear shaft. Hook the belt 1 on the conversion gear in a slant angle and install it by rotating the conversion gear with fingertip.
BELT Key Points in Re-assembling
2 Conversion gear
Hook the belt 1 on the conversion gear in a slant angle. Do not remove the capstan motor assy.
1 Belt
The belt must not be twisted.
Conversion gear shaft
Apply Grease Points to be noted
Apply grease when installing it. Amount of grease: a ball of grease of 1.0 mm diameter Apply grease Conversion gear shaft
The belt must not override on the capstan motor block assy.
� The belt must not override on the capstan motor block assy. � When installing the belt, the belt must not have any twisting, dust, scar or grease must not be splashed on belt.
� 35 �
 $4.99 DCRHC30 SONY
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
