|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
DCR-PC101/PC101E
4.
Overall Noise Level Check Camera recording and playback No signal: Insert a shorting plug in the MIC jack Audio left or right terminal of A/V jack Audio level meter Below �45 dBs (IHF-A filter ON, 20 kHz LPF ON)
Mode Signal Measurement Point Measuring Instrument Specified Value
Checking Method: 1) Insert a shorting plug in the MIC jack. 2) Record in the camera mode. 3) Playback the recorded section. 4) Check that the noise level is the specified value.
5.
Overall Separation Check Camera recording and playback 400 Hz, �66 dBs signal: MIC jack <right> [left] (Connect the MIC jack <left> [right] to GND) Audio <left> [right] terminal of A/V jack Audio level meter Below �40 dBs (IHF-A filter ON)
Mode Signal
Measurement Point Measuring Instrument Specified Value < > : Left channel check [ ] : Right channel check
Checking Method: 1) Input the 400 Hz, �66 dBs signal in the <right> [left] terminal of the MIC jack only. 2) Record in the camera mode. 3) Playback the recorded section. 4) Check that the signal level of the audio output <left> [right] terminal is the specified value.
5-58
|
|
|
> |
|
