|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
very good manual, with detail and clarity in esquematic diagrams and waveforms .
 ;
Very quality copy of original service manual, which contains the circuit diagrams, PCB and lists of components, well as recommendation for calibration procedures of device, also everything else, that need for repair, tuning and use this oscilloscope.
All presented copies have high-resolution, so you can view all in detail.
This manual will very useful for simple owners and for repairers.
I recommend these manual, because myself is owner of Philips PM3216 and I need sometimes servicing these oscilloscope (principally calibrating).
Also, these document is an example of excellent design of technical documentation.
;
Excellent printing quality.
A complete and very usefull service manual with all details.
GREAT SERVICE AT VERY LOW PRICE!
A+++++++++++++++++++++++++
;
manual excelente completo , diagramas y esquemas bien presentados y buena calidad de imagen.
;
muy buen manual completo de buena calidad de impresion preciso y detallado , muy útil para la reparación.
DCR-TRV12E/TRV14E/TRV19/TRV19E
2-9. HINGE (40) ASSEMBLY
Caution
2
Rotation of the LCD panel has limitation due to its hinge in this model. Excessive force to rotate the LCD panel damages the hinge. (Refer to "Caution"of 2.1 Pcabinet assembly.)
A
1 Screw 2 Rotate to the "A" marked portion (M1.7 � 4), counterclockwise by 90 degrees lock ace, p2
Caution
If the FP-626 flexible board is removed once, the adhesion strength of a double-sided tape decreases. Use the new FP-626 flexible board at the time of an assembly.
8 Remove the FP-626 flexible board that is attached by the doble-sided tape 3 7 Hinge cover (M) (40)
Dowel for setting the position
B 4 Three claws
3
6 Screw (M1.7 � 4), lock ace, p2
3 Rotate the "B" marked portion counterclockwise by 90 degrees in the direction of the arrow
Hinge (40) assembly
5 Hinge cover (C) (40)
0 Hinge (40) assembly
Remove the Harness (PV-140) in the direction of the arrow
9 Harness (PV-140)
Bend the Harness (PV-140) along with connector
2-10
|
|
|
> |
|
