FUNAI DDVR-6515
Owner's Manual

H9976ED(EN).fm Page 19 Thursday, February 24, 2005 8:56 PM

Turn down the level or turn it �OFF� if the sound is distorted. � The setting will be saved even if this unit is turned off. � This function cannot be used during x1.3 and x0.8 Rapid Play with Voice. (Refer to page 17.) Track Search
CD MP3 VCD

�

Using the Number buttons

There are three ways to begin the playback of a specific track on a disc.
Using the Number buttons

1) During playback, press the Number buttons to enter the desired chapter number. �Playback will start at the selected chapter. �For single digit chapters (1-9), press a single number (e.g. to play chapter 3, press 3). �To play chapter 26, press +10, 2, 6. Depending on the disc being played, Note: � using the Number buttons cannot be performed.
Using SKIP H G

1) Press the Number buttons to enter the desired track number. �Playback will start at the selected track. �For any discs, to play a single-digit track, press the number directly (e.g. for track 3, press 3). �For the disc with less than 100 tracks, to play a doubledigit track, press +10, then the number (e.g. for track 26, press +10, 2, 6). �For the disc with more than 100 tracks, to play a doubledigit track, press +10, 0, then the number of the track (e.g. for track 26, press +10, 0, 2, 6). To play a tripledigit track, press +10, then the number of the track (e.g. for track 126, press +10, 1, 2, 6).
Using SEARCH MODE

During playback, press SKIP G to go to the next chapter. Press it repeatedly to skip subsequent chapters. Press SKIP H to go back to the beginning of the current chapter. Press it repeatedly to go back to the previous chapter. Time Search
DVD-V CD VCD

1) During playback, press SEARCH MODE repeatedly until the Time Search screen appears on the TV screen.
TOTAL 1:29:00

2) Within 30 seconds, enter a desired disc time using
the Number buttons.

1) Press SEARCH MODE. �The Track Search display appears. 2) Within 30 seconds, select a desired track number using
the Number buttons.

Using SKIP H G

�Playback will start at the selected track. �For the disc with more than 10 but less than 100 tracks, to play a single-digit track, press 0 first, then the number of the track (e.g. for track 3, press 0, 3). �For the disc with more than 100 tracks, to play a single or double-digit track, press 0 first, then the number of the track (e.g. for track 3, press 0, 0, 3 and for track 26, press 0, 2, 6). �In any other cases, just press the number of the track.

�Playback will start at the specified time. �For DVDs, enter a desired time of the current title. �For Audio CDs and Video CDs, enter a desired time of the current track. �Press CLEAR to erase the incorrect input. Note: � �0� appears automatically when there is no need to enter a number. For example, �0:0_:_ _� appears in the Time Search display if the total time of the disc or track is less than 10 minutes. � Time Search is not available on some discs. Marker Setup
DVD-V CD VCD

During playback, press SKIP G to move to the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to the beginning of the current track. Press it repeatedly to go back to the previous tracks. �If SKIP H G are pressed while the playback is paused, the playback will be paused again after skipping to the next track. Note: � SKIP H G are not available when playback is stopped. Chapter / Title Search
DVD-V Using SEARCH MODE

Use markers to memorise your favourite places on a disc. 1) During playback, press SEARCH MODE repeatedly until the Marker Setup screen appears on the TV screen.

1) During playback, press SEARCH MODE once for the Chapter Search, twice for the Title Search.
/29

2) Enter the desired chapter/title number using the Number
buttons.

2) Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that �_ _ _ _:_ _:_ _� appears in the display. 3) When the disc reaches the desired point, press ENTER. �The Title or Track and elapsed time will appear on the TV screen. 4) To return to the marker later, press SEARCH MODE repeatedly until the Marker Setup screen appears and s or B to choose the desired marker, then press ENTER. 5) Press SEARCH MODE or RETURN to exit. Note: � Opening the disc tray, turning off the power or selecting �AC� at step 2) and press ENTER will erase all markers. � To clear a marker, use s or B and select the marker number to be cleared, and then press CLEAR. � You can mark up to 10 points.

19

EN