This service manual of the old video cassette recorder VT-LC50EM is very good readable even the tiniest numbers (i.e. IC-pins). The circuits are very clear. Many details of the schematic are very good described but in GERMAN language. Many schematic details - but complete at all. Common background information of several details are enclosed and physical knowledge of the TFT liquid crystal display for example. The manual lacks PCB drawings. If you understand german I would recommend this manual for you.
Hi, this is a very clear manual, nice copy, not quite up to the standard of the very best available but better than many others. I think the price was especially fair for a hard to find manual and I would certainly use this manual seller again. Recommended.
Helpd me mont a new carradio when prewius mont was a mess.
Text excerpt from page 69 (click to view)
DEH-1000,10,1050
Equalizer Curve Fine Adjustment
You can adjust the center frequency of each equalizer curve band (LOW/MID/HIGH) and the Q factor (curve characteristics).
Level (dB)
Q=2N Center frequency
Q=2W Frequency (Hz)
1. Press the AUDIO button for 2 or more seconds to select Equalizer Curve Fine Adjustment. 2. Press the AUDIO button to select the desired band for adjustment. 3. Select the desired frequency with the 2/3 buttons.
LOW: 40 + 80 + 100 + 160 (Hz) = = = MID: 200 + 500 + 1K + 2K (Hz) = = = HIGH: 3K + 8K + 10K + 12K (Hz) = = =
4. Select the desired Q factor with the 5/� buttons.
2N + 1N + 1W + 2W = = =
Loudness Adjustment (LOUD)
The Loudness function compensates for deficiencies in the low and high sound ranges at low volume. You can select a desired Loudness level.
1. Press the AUDIO button and select the Loudness mode (LOUD) in the Audio Menu. 2. Switch the Loudness function ON/OFF with the 5/� buttons. 3. Select the desired level with the 2/3 buttons.
LOW + MID + HI = = Note:
� You can also switch the Loudness function ON/OFF by pressing the LOUD button. However, you cannot change the level.