Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Very good scanning quality. All schematics are very legible. Worth every cent !
Text excerpt from page 47 (click to view)
DEH-P4300R,P4300RB
7.1.2 DISASSEMBLY
- Removing the Case (not shown) 1. Remove the Case.
CD Mechanism Module
- Removing the CD Mechanism Module (Fig.1) Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module. - Removing the Grille Panel Assy (Fig.1) Remove the two screws and then remove the Grille Panel Assy.
Grille Panel Assy
Fig.1
- Removing the Tuner Amp Unit (Fig.2) Remove the two screws. Straight the tabs at three locations indicated. Remove the screw. Remove the three screws and then remove the Tuner Amp Unit.
*) Tuner Amp Unit is different partially from this photo.