The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
Text excerpt from page 9 (click to view)
D-E888/E999/EJ825/EJ925
�MAIN BOARD�, �OPTICAL PICK-UP SECTION (CDM-3021EBG)�
Note: Do not apply an excessive force when removing an adhesive sheet (MD) from the optical pick-up flexible board.
4 Holding up the optical pick up section a little, remove the adhesive sheet (MD). 1 tapping screw (B) (1.4 � 3)
3 terminal board (relay), battery
optical pick-up flexible board
2 saranet cushion
S804 S803 Note on installation MAIN board: When installing MAIN board, adjust the S803, S804 and knob (AV, HOLD).
5 Hold up both the optical pick-up section and the main board at the same time. Note: Be careful to hold them up because the optical pick-up flexible board is still connected to the main board.