|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It has all the information you will need to fix it. The main circuit diagram is only A4 but being a PDF, you can print it to any size - I did it on two sheets of A3 and it didnt lose any detail - just made it readable when pinned up above the bench. I've found the fault, just need to buy some obscure bits to get it going again!
I cant fault the process, I paid for the manual in the morning and it was ready to download by lunch time.
 ;
Very good copy in a 54 pages PDF archive. This is my sixth purchase here. :)
 ;
Another excellent buy! File too clear and explanatory.
 ;
A manual hard to find. It was very helpful to restore my device.
 ;
I am very grateful for this manual. Without it could not repair my receiver.
1-4. Replacement of Main Parts
1-4. Replacement of Main Parts
w To avoid shock hazard, be sure to turn the power switch off, and unplug the appliance from the outlet.
6. Disconnect the harnesses from the five connectors (CN1, CN2, and CN51 to CN53) on the switching regulator. 7. Remove the three screws, and remove the switching regulator.
PSW4 x 8
1-4-1. Power Supply Unit
w Never repair the inside of the power supply unit itself. The power supply unit is critical parts to safe operation. If the component part of the power supply unit is replaced, this may cause a fire or electric shock. Replacement procedures 1. 2. 3. 4. 5. Turn the power off. Unplug the appliance from the outlet. Open the front panel. (Refer to Section 1-2-1.) Remove the top plate. (Refer to Section 1-2-2.) Remove the six screws, and remove the two stays.
Stay BVTT3 x 6 BVTT3 x 6
Switching regulator CN2 Ground wire PSW4 x 8 CN1
CN53 CN52 CN51
8. Install a new switching regulator and the removed parts in the reverse order of the steps 1 through 7.
Stay
1-4 (E)
DEP-100
|
|
 |
> |
|