Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Text excerpt from page 14 (click to view)
Installing the fume extractor hood in the wall unit - extractor version (Filter version with charcoal filter) � Apply the drilling template to the inside wall of the wall unit on the right and left sides, and mark out and predrill � 2 mm mounting holes as well as 2 x � 6 mm - 5 mm depth holes for the mounting claws (installation aids). � Fix the flange on the hood outlet hole, using 2 screws. Fig. 6a. � Fully withdraw the vapour catcher of the hood. � Important: Detach and insert the grease filters only when the vapour catcher is fully withdrawn. Remove the grease filters. First remove the rear and then the front grease filter. � For 19 mm side walls, the spacer discs clipped in on the appliance body must be taken out. Mount the hood with 4 x � 4 mm screws. Fig. 7.
Fig. 7 � Insert the hood in the furniture housing and engage both mounting claws (installation aids) on the right and left sides in the side wall of the wall unit and firmly hold the hood for further mounting. Then fix the hood with the 4 or 6 x � 4 mm screws supplied. � Refit the grease filters. Push-in the vapour catcher.
