|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Timer recording radio programs (continued) To check the timer
Follow the procedure in �To turn on or off the timer� (see page 61). Select the timer number you want to check in step 1 and select �ON� in step 2. The setting appears at the end of the procedure.
Notes
� If you select �MDALL� in step 9 to record a long program and the MD in the MD 1 slot becomes full, the rest of the program is automatically recorded on the MD in the next slot. If no other MDs are inserted, insert another recordable MD in the next slot and remove the MD you do not want to record on beforehand. The program will not be recorded while the MDs are being exchanged. � Do not operate the system from the time the power turns on until the recording starts (about 30 seconds). � If the start time and stop time are the same, the cursor goes back to the stop time. Change the stop time. � When you record on a blank MD, the first 30 seconds are not recorded. � If the power is on at 30 seconds before the preset time, the recording will not be made. � The volume is reduced to minimum during recording.
When the setting time is overlapped
The time indicated with recorded.
REC 1 REC 2 The last 30 seconds REC 1 REC 2
cannot be
REC 1 REC 2 The last 30 seconds
Tip
The MD is automatically labeled with the Station Name (or frequency if the station is not labeled), the start time and the stop time of the recording (see page 55).
62
|
|
|
> |
|
Home
