|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
;
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
;
Received a quick response, material was exactly what it was supposed to be. The service did everything I expected it to do. would use service again.
;
Detailed SONY CFD980 Service Manual at an easy to find one stop shopping. Make my radio hobby technically interesting. Thanks.
 ;
Excellent service from Owner-Manuals.com, good prices and quick turn around. The supplied PDF was good enough quality to be enlarged sufficiently to read component values.
FIXING UNIT
a. (1) (2) (3) (4)
Caution: This is an important safety part. (P/N: SP00-0020) Be sure to observe the following cautions and steps when removing or reinstalling. Caution1: After reinstalling the thermostat/U, make sure that its wires do not touch the fixing upper roller. Caution2: When reinstalling the thermostat/U, adjust its position using the positioning jig (4024-2152-01) and secure it with screws. Be sure to apply screw lock agent to the screws. This adjustment should be made in a pressured state. Removal procedure Remove the fixing unit. Remove the web cover. Remove the cleaning web. Remove one screw and two Faston terminals to detach the thermostat/U. Thermostat/U (TS1) Screw
1
23
4 2
5
1. 2. 3. 4. 5.
Fixing upper roller Positioning jig (4024-2152-01) Faston terminal Screw Thermostat/U (TS1)
f) Set the distance "a" between the thermostat/ U and fixing upper roller so that it is equal to the thickness (B) of the positioning jig. Thermostat/U (TS1) Faston terminals (2)
b
Fixing upper roller Standard value of b : 3.75 ± 0.1 mm
1-O-11
1 3 DIS./ASSEMBLY
[13] Removing and Reinstalling the Thermostat/U (TS1)
b. Reinstallation procedure (1) Connect two Faston terminals to the thermostat/ U. (2) Set a thermostat positioning jig (4024-2152-01) between the thermostat/U and fixing upper roller and secure the thermostat/U with one screw so that the distance between the roller and thermostat/U is equal to the thickness of the jig.
|
|
|
> |
|
