|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
;
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
;
Wow very wonderful and clear!!!! I will always trust them
;
Providing the manual works fine, quickly and without any problems for an acceptable price. After printing the service manual it took me only a short time to repair my carradio from Clarion. Thank You! Greetings from Heiko
;
I was searching a way to modify the original phono-in entry (for connection of vynil disc player, with RIAA equalization) to a line-in entry (for connection of modern analog entries, eg. ipod, mp3player).
This service manual gave me the correct hints.
It contains very useful infos for repairing and modifing the hi-fi, such as disassembling instructions, block diagrams, schematic diagrams, PCB prints, replacement parts list.
Very good!
Reference frequency adjustment 1. In the adjustment mode, select channel 1 by rotating the main tuning dial.
2. Press the key to start transmission. 3. Rotate TC1 on the main board until the value on the frequency counter matches the one displayed on the LCD.
UHF high-power adjustment 1. In the adjustment mode, select channel 2 by rotating the main tuning dial.
2. Hold down the key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the value closest to 4.5W by rotating the main tuning dial. 4. When the key is released, the output power at that time will be stored as the high power setting.
UHF low-power adjustment 1. In the adjustment mode, select channel 3 by rotating the main tuning dial.
2. Hold down the key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the value closest to 0.8W by rotating the main tuning dial. 4. When the key is released, the output power at that time will be stored as the low power setting.
VHF high-power adjustment 1. In the adjustment mode, select channel 4 by rotating the main tuning dial.
2. Hold down the key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the value closest to 4.5W by rotating the main tuning dial. 4. When the key is released, the output power at that time will be stored as the high power setting.
VHF low-power
1. In the adjustment mode, select channel 5 by rotating the main tuning dial. 2. Hold down the key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the value closest to 0.8W by rotating the main tuning dial. 4. When the key is released, the output power at that time will be stored as the low power setting.
28
|
|
|
> |
|
