|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
EFFECT FUNCTIONS
EFFECT PARAMETERS
Beat Effect (*1)
Name 1 DELAY 2 ECHO (*2) 3 TRANS 4 FILTER Beat Switch Parameter Sets delay time of 1/8 to 16/1 per 1 beat of BPM time. Sets delay time of 1/8 to 16/1 per 1 beat of BPM time. Sets cut time of 1/16 to 16/1 per 1 beat of BPM time. Cycle of cutoff frequency shift is set in unit of 1/4 to 64/1 relative to 1 beat of BPM. Cycle of flanger shift is set in units of 1/4 to 64/1 relative to 1 beat of BPM. Cycle of phaser effect shift is set in units of 1/4 to 64/1 relative to 1 beat of BPM. Parameter 1 (TIME dial) Contents Setting Range (unit) Sets delay time. Sets delay time. Sets effect time. 1 to 4 000 (ms) 1 to 4 000 (ms) 10 to 16 000 (ms) Parameter 2 (LEVEL/DEPTH dial) contents Sets balance between original and delay sound. Sets balance between original sound and echo sound. Sets balance between original sound and effect sound. Amount of effect increases when dial is turned clockwise. Amount of effect increases when dial is turned clockwise. When dial is turned fully counterclockwise, only original sound is output. Amount of effect increases when dial is turned clockwise. When dial is turned fully counterclockwise, only original sound is output. Sets balance between original sound and effect sound. Amount of effect increases when dial is turned clockwise. Amount of effect increases when dial is turned clockwise. When dial is turned fully counterclockwise, only original sound is output. Sets balance of original sound and roll sound. Sets balance of original sound and roll sound. Sets balance of original sound and roll sound. Sets balance of original sound and roll sound. Sets volume of RETURN input sound.
Sets cycle for cutoff 10 to 32 000 (ms) time shift. Sets cycle for flanger effect shift. 10 to 32 000 (ms)
5 FLANGER
6 PHASER
Sets cycle for phase 10 to 32 000 (ms) effect shift.
7 REVERB (*2) 8 ROBOT
Amount of reverberation is set Sets amount of 1 to 100 (%) from 1 % to 100 %. reverberation effect. Sets pitch of robot sound effect within range of �100 % to +100 %. Sets pitch of robot sound effect. �100 to +100 (%)
9 CRUSH
Cycle of crush effect Sets cycle for crush 10 to 32 000 (ms) movement is set to 1/4 to 64/1 effect shift. relative to a single beat of BPM. Effect time is set as 1/16 to 16/1 Sets effect time. relative of 1 beat of BPM. Effect time is set as 1/16 to 16/1 Sets effect time. relative of 1 beat of BPM. 1 to 4 000 (ms) 1 to 4 000 (ms) 1 to 4 000 (ms) 1 to 4 000 (ms) �
10 ROLL (*2) 11 REVERSE ROLL (*2)
12 UP ROLL (*2) Effect time is set as 1/16 to 16/1 Sets effect time. relative of 1 beat of BPM. 13 DOWN ROLL Effect time is set as 1/16 to 16/1 Sets effect time. (*2) relative of 1 beat of BPM. 14 SEND/ RETURN � �
(*1) When the effect channel selector is set to [CF.A], [CF.B], or [MASTER], even if the effect monitor is turned ON, if the selected channel�s sound is not output to the master output, the effect sound will not be heard. (*2) When effect is disabled (OFF), the effect sound will not be heard, even if monitor is set to effector.
20
En
|
|
|
> |
|
