|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is a very good quality print (scan) of the original SONY service manual. The original from Sony is on very thin paper. Nevertheless it is very clear and sharp and excellent readable. I'm very satisfied to have now this rare document. I've looking for it many years (infrequent). It contains very detailed circuit diagrams, exploded views, part lists, PCB view with good readable connection lines. Very recommended.
;
A complete manual with all the needed details of calibrations and service instructions about the radio receiver.
A big deal.
Many thanks !
;
Fast delivery and good quality copy. To be recommended
;
Excellent product, very clear print. Detailed circuit and assembly diagrams - this enabled me to repair my CD player with confidence. I highly recommend this site.
;
Fast access, 100% correct and complete service manual
SERVICE MODE
Function
KEY
Name
Details OPERATING METHOO
DEFAULT
ADJUSTMENT
remark
S10
PC ADJUSTMENT
S11 S12
OPTION Shipping
GAIN R GAIN G GAIN B OFFSET R OFFSET G OFFSET B TELETEXT OPTION DELAY -
S10 � PC MODE � PC SIGNAL ADJUSTMENT (IF EEPROM ERASE(S5) IS ON, THIS SETTING IS ERASED. DEFAULT ADJUSTMENT 10 10 10 -30 -30 -30 west-eu, east-eu, russia, greek, arabic, farci, arabich TOP&FLOP, TOP, FLOP, NON 03 (PAL=1 YC DEALY)
FIX FIX FIX FIX FIX FIX TTX language select TTX sorting mothod select FIX It is erased factory freqency table (exepting for s8,9,10,11)
5-2-2. Description of SERVICE MODE ITEM A. S1(1): Heat-Run Key => This key can check ROM VERSION. B. S2(2): I2C STOP Key => This key only use for R&D. C. S3(3): Sound/ Timer test Key => This key can check sound and decide a defect of Timer LED. D. S4(4): Tilt test Key => This key only use for adjustment of factory. E. S5(5): EEPROM Erase Key => After Mi-com update, you must erase EEPROM data using this key. F. S6(6): DECODER Key. => For the CVBS signal (Main and Sub in PIP mode) adjustment, this key adjust brightness, contrast and color. G. S7(7): PANEL TEST Key. => Using this key, you can test problem of PANEL, as confirm white pattern, red pattern, blue pattern, green pattern H. S8(8): PANEL WHITE BALANCE Adjustment Key => Using this key, you can adjust PANEL WHITE BALANCE. GAIN R,G,B: As adjust this factor, you can increase or decrease Contrast of each color. OFFSET R,G,B: As adjust this factor, you can increase or decrease Black Level of each color. I. S9(9): COMPONENT VIDEO Adjustment Key => Using this key, you can adjust WHITE BALANCE of COMPONENT VIDEO. Y, Cb, Cr DRIVE: As adjust this factors, you can increase or decrease Contrast of each color. Y, Cb, Cr OFFSET: As adjust this factor, you can increase or decrease Bright Level of each signal. J. S10(10): PC ADJUSTMENT Key. => Using this key, you can adjust WHITE BALANCE of PC. GAIN R,G,B: As adjust this factor, you can increase or decrease Contrast of each color. OFFSET R,G,B: As adjust this factor, you can increase or decrease Bright Level of each color. K. S11(LOCK): OPTION Key => Using this key, you can select TTX language, TTX sorting method. TELETEXT(language): West-EU, East-EU, Russia, Greek, Arabic, farci, arabich OPTION(sorting method): TOP&FLOP, TOP, FLOP, NON DELAY: Don�t Adjust this factor. L. S12(SLEEP): Shipping key => Using this key, you can set up at shipping mode.
-28-
|
|
|
> |
|
