|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The service manual when downloaded and printed out was clear and easy to read. I would have liked to have been able to enlarge some details, but this was not possible as the file permissions did not allow this. The service was very good. The time taken from placing my order to downloading the document was only a few minutes.
 ;
The manual is useful for trouble shooting for an old instrument. It saved money,and let me enjoy DIY.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
;
Very good scanned copies. Quick response and reasonable price. Thanks for service!
Main PCBs Trouble Diagnosis
7-1-3. When Control Key does not operate
Check Start
N After turn on the power, does LED turn on red light?
1. Check AC connection 2. Check Power S/W ON 3. Check other PCBs
Y
After ST-BY on Does LED turn on green light?
N
Check the connection of KEY PCB to MAIN PCB -> Check the connection between KEY PCB and MAIN PCB
Y
Is output first pin PW7 normal?
N
1. Replace the CON NECTOR 2. Replace KEY PCB
Y
Check Main PCB
A. First check connection, and then check the output of first pin of PA912(ST-BY 3.3V) B. Check waveform first pin and third pin of PA911. If waveform does not appear, replace connector or KEY PCB. -main TP : RC398, RC399
-39-
|
|
|
> |
|
