|
Who's Online
There currently are 5726 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Others
Troubleshooting
If you put the menu back to the settings at the time of purchase, the conditions may be improved. Carry out the [RESET] in the [SETUP] menu. (P20) � Battery and the power source 1: The camera cannot be operated even when it is turned on. � Is the battery inserted correctly? � Check the direction of the battery. (P15) � Is the battery sufficiently charged? � Use a battery that has been sufficiently charged. 2: The LCD monitor is turned off even when the camera is turned on. � Is the power save mode or economy mode activated? (P20) � Press the shutter button halfway to cancel these modes. � Is the battery charge insufficient to operate the camera? � Use a battery that has been sufficiently charged. 3: The camera is turned off immediately even after it is turned on. � Is the battery charge insufficient to operate the camera? � Use a battery that has been sufficiently charged. � If you leave the camera with turning it on, the battery is exhausted. Turn the camera off frequently by using the power save mode, the economy mode, etc. (P20) � Recording 1: The picture cannot be recorded. � Is the card inserted? � Is the mode dial correctly set? � Is there any memory capacity left on the card? � Before recording, delete some pictures. 2: The subject is not focused properly. � The focus range varies depending on the recording mode. Rotate the mode dial to set to the proper mode for the distance to the subject. � Is the subject out of the focus range? (P30) � When you cannot focus on the subject even if you tried many times, turn the camera off once and turn it on again. 3: The recorded picture is blurred. � When taking a picture especially in dark places, the shutter speed becomes slow and the optical image stabilizer function may not work properly. In this case, we recommend holding the camera with both hands firmly to take pictures (P29). When the [SLOW SHUTTER] (P69) is set, we recommend using a tripod and the self-timer (P40) for taking pictures. 4: The recorded picture is whitish. � Check fingerprint on the lens. � Make sure not to touch or stain the lens surface. If the lens is dirty, eject the lens barrel (P11) and gently wipe the lens surface with a soft dry cloth.
99
VQT0R26
|
|
|
> |
|