Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 112 (click to view)
Others
Troubleshooting
If you put the menu back to the settings at the time of purchase, the conditions may be improved. Carry out the [RESET] in the setup menu. (P24) Conditions Causes
The camera will not turn Is the battery inserted correctly? on. Is the battery sufficiently charged? Use a battery that has been sufficiently charged. As the camera is turned on, it turns off immediately. Is the battery charge insufficient to operate the camera? Use a battery that has been sufficiently charged.
The brightness of the This phenomenon appears when pressing the shutter button screen becomes dark or halfway to set the aperture value and does not affect the bright for a moment. recorded pictures. The picture cannot be recorded. Is the card inserted? Is the mode dial correctly set? Is there any memory capacity left on the card? Before recording, delete some pictures. The picture is not displayed on the LCD monitor. The screen is too bright or dark. Flash is not activated. Does the picture appear on the Viewfinder? Press the [EVF/LCD] button to switch to LCD monitor display. Adjust the brightness of the screen. Is the flash closed? Press the [ OPEN] button to open the flash.
Unreadable language Select [ ] icon on the [SETUP] menu to set the desired was selected by mistake. language. The subject is not focused properly. The focus range varies depending on the recording mode. Rotate the mode dial to set to the proper mode for the distance to the subject. Is the subject out of the focus range? (P34) When you cannot focus on the subject even if you tried many times, turn the camera off once and turn it on again. The picture is not played Is the card inserted? back. Is there a picture in the card? Is the mode dial set to playback [ ]? The picture does not Is the camera connected to the TV correctly? appear on the television. Check it. Set the TV to video input mode.
