|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
 ;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
;
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Others
About dirt on the image sensor This camera features an interchangeable lens system so dirt may get inside the camera body when changing lenses. Depending on the recording conditions, dirt on the image sensor may appear on the recorded picture. Do not change lenses where there is a lot of dust, and always attach the body cap when a lens is not attached to the camera, so that dirt or dust does not get inside the camera body. Remove any dirt on the body cap before attaching it. Clean any dirt on the image sensor using the steps below. Removing dirt on the image sensor Black spots may appear on the recorded picture if dirt or dust gets on the image sensor. The image sensor is very delicate and easily scratched. If it becomes necessary to clean the image sensor, always use the following steps. � Use the AC adaptor when cleaning. If you use the battery and the remaining battery power becomes low during cleaning, the shutter will close and the shutter curtains and the mirror may be damaged. 1 Detach the lens. (P16) 2 Turn the camera on. 3 Set [NO RELEASE WITHOUT LENS] in the [CUSTOM] menu to [OFF]. (P87) 4 Set the focus mode lever to [MF]. (P42) 5 Set the shutter speed to [B] (Bulb). (P39) 6 Press and hold the shutter button. � The mirror goes up and the shutter curtains open. 7 Clean the image sensor. � Blow off the dust on the surface of the image sensor with a commercially available blower brush. Be careful not to blow too strongly. � Do not put the blower brush further inside than the lens mount.
� Do not let the blower brush touch the image sensor as the image sensor may get scratched. � Do not use any objects except a blower brush to clean the image sensor. 8 Release the shutter button. � The shutter curtains close and the mirror goes down when the camera is turned off. Be careful that the blower brush does not get caught in the shutter curtains. 9 Turn the camera off. � Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity. If the temperature is too high or too low, the operating time of the battery will become shorter. After use, be sure to remove the battery. Bring charged spare batteries when going out. � Be aware that the operating time of the battery becomes shorter in low temperature conditions such as at a ski resort. � When you travel, do not forget to bring the AC adaptor (supplied) so that you can charge the battery in the country that you are traveling in. If you drop the battery accidentally, check to see if the body of the battery and the terminals are damaged. � Inserting a damaged battery in the camera will damage the camera.
112
VQT0W82
|
|
|
> |
|
