|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT
1.2.2.
INITIAL SETTINGS:
When you replace the Main PCB be sure to perform the initial settings after achieving the Adjustment, by ordering the following procedure in accordance with model suffix. · Step 1. The temporary cancellation of factory setting: Set the shutter speed dial to � 8 �. While keep pressing AFL/AEL Press the � Playback Press FUNC.2 , then turn the Power on. · Step 2. The cancellation of factory setting: � button to playback mode. and � UP of Cursor key� simultaneously, then turn the Power off.
· Step 3. Turn the Power on: Set the shutter speed dial to � A �, and then turn the Power on. · Step 4. Display the INITIAL SETTING: 1. Press the Playback button, and then viewing information display. and � RIGHT of Cursor key� simultaneously, turn the Power off. 2. While keep pressing MENU/SET
· Step 5. Set the INITIAL SETTING: Select the area with pressing � UP / DOWN of Cursor key�, and then press the � RIGHT of Cursor key�.
The only set area is displayed, and then press the � RIGHT (The unit is powered off automatically.)
of Cursor key� after confirmation.
4
|
|
|
> |
|
