|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The purchased manual is an high-quality scan of the original JVC paper-based Service Manual. The Service Manual includes the Owner´s Manual, so you do not have to buy both of them.
 ;
It paid to find this Service Manual, couldn't find it anywhere else. Exactly what I wanted. Received within 24 hours.
;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
;
Excellent printing quality. A complete and very useful manual with all details.
;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
DMC-L1KPP / DMC-L1KEB / DMC-L1KEG / DMC-L1KGC / DMC-L1KGK / DMC-L1KGN / DMC-L1KGT
1.2.2.
INITIAL SETTINGS:
When you replace the Main PCB be sure to perform the initial settings after achieving the Adjustment, by ordering the following procedure in accordance with model suffix. · Step 1. The temporary cancellation of factory setting: Set the shutter speed dial to � 8 �. While keep pressing AFL/AEL Press the � Playback Press FUNC.2 , then turn the Power on. · Step 2. The cancellation of factory setting: � button to playback mode. and � UP of Cursor key� simultaneously, then turn the Power off.
· Step 3. Turn the Power on: Set the shutter speed dial to � A �, and then turn the Power on. · Step 4. Display the INITIAL SETTING: 1. Press the Playback button, and then viewing information display. and � RIGHT of Cursor key� simultaneously, turn the Power off. 2. While keep pressing MENU/SET
· Step 5. Set the INITIAL SETTING: Select the area with pressing � UP / DOWN of Cursor key�, and then press the � RIGHT of Cursor key�.
The only set area is displayed, and then press the � RIGHT (The unit is powered off automatically.)
of Cursor key� after confirmation.
4
|
|
|
> |
|
