|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
complete and unabridged very good quality
easy to download.
recieved in two days.
;
Awesome manual. Complete diagrams of all board assemblies as well as how to get to each part of the t.v. down to the individual screws and their locations. Get it.
;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
3.4.2.
INITIAL SETTINGS:
When you replace the Main PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following procedure in accordance with model suffix of the unit. 1. IMPORTANT NOTICE: Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES: � Precautions: Proceed the picture back up from the unit. (Refer to above "CAUTION 2") � Preparation. Set the Recording mode to "Normal Picture Mode". Set the Recording/playback switch to �[ Recording mode ] (camera mark Turn on the power and then press the [MODE] button. Select the �NORMAL PICTURE MODE" using �[ UP ] / [ DOWN ] Press [ MENU/SET ] button, then turn the power off. � Step 1. The temporary cancellation of initial setting: (UP))�.
of Cursor button�.
Set the Recording/playback switch to �[ Recording mode ] (camera mark
(UP))�.
While keep pressing [ E.ZOOM ], [ MENU ] and �[ UP ] of Cursor button� simultaneously, turn the Power on. � Step 2. The cancellation of initial setting: Set the Recording/playback switch to �[ Playback (Down) ]�. Press [ E.ZOOM ], [ MENU ] and �[ UP ] � Step 3. Turn the Power on: of Cursor button� simultaneously, then turn the Power off. (UP))�, and then turn the Power on.
Set the Recording/playback switch to �[ Recording mode ] (camera mark � Step 4. Display the INITIAL SETTING: While keep pressing [ MENU ] and �[ RIGHT ]
of Cursor button� simultaneously, turn the Power off.
8
|
|
|
> |
|
