|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is a high quality manual with clear schematic and components layout diagrams ; with service procedure included.
 ;
This service manual for the Kenwood KT-990D was reproduced really well ,is very legible and manual is complete.Combined with the low price paid,in the future,I will be checking Owner-Manuals.com any time I need a manual.
;
When I purchased this manual I had my doubts regarding the quality as the price was so reasonable as compared to other outlets.
The manual itself is of high standard the print is very clear as are the diagrams. Obviously with the diagrams one has to zoom in otherwise it is to small to be able to read.
Overall I am very pleased with the company who delivered as they said and with the manual they supplied.
I occasionally require a manual and now having registered with this company I shall order from them in the future.
;
I was at first dubious about payiong for downloaded manuals but having done so, I was extremely impressed with quality of the two manual I ordered, well worth the small price I paid.
I would highly recommend these to my friends.
;
reasonable price for the schematic - the service is perfect, all as expected and pointed by instructions - good scan of the original plans - thank you!
7 Taking out the Disc from RAMDrive Unit when the Disc cannot be ejected by OPEN/CLOSE button
7.1 Forcible Disc Eject
7.1.1 When the power can be turned off.
1. Turn off the power and press [STOP] [CH UP] keys on the front panel simultaneously for 5 seconds.
7.1.2 When the power can not be turned off.
1. Press [POWER] key on the front panel for over 10 seconds to turn off the power forcibly, and press [STOP] [CH UP] keys on the front panel simultaneously for 5 seconds.
7.2 When the Forcible Disc Eject can not be done.
1. 2. 3. 4. 5. 6. 7. Turn off the power and pull out AC cord. Remove the Top Case. Remove the Front Panel. Remove 4 screws and Upper Base Unit from DVD-RAM Drive. Take out the disc and put the Opener Roller on fully position for direction of Arrow. Put the Upper Base Unit so that the Opener Roller is inserted into the groove. Check Opener Roller is seen through the Opener position Checking Hole, and tighten 4 screws.
|
|
|
> |
|
