|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
;
Dear Sir,
Document is original service document of sharp. I had a problem with the door contacts. Fuses where blown. With the manual in a few minuts is was clear what the problem was.
Manual was of great help.
With kind regards,
Martie Verhoeven
The Netherlands.
DMR-EH58GN / DMR-EH58GC / DMR-EH58GCS
Item Mode name Description HDD READ VERIFY Measure of access time in READ VERIFY At start Inspection MODE of HDD.
FL display
Key operation (Remote controller key) Press [3] [2] in service mode. * When canceling the inspection mode while executing, do �forced power-off�. Method: Press [POWER] key more than 10 seconds.
The [*] sign is added every 20 seconds while inspecting. Two digits on the right side are the progress level of the inspection (The unit is %). Example on the way of inspection:
When HDD is OK after inspection:
(NG is displayed when error is excluding o ) (Transfer rate is calculated from the AV scanning result, and when it is less than 35Mbps, NG is displayed. )
$: [X] is displayed when seek time is over 270msec., there is error or transfer rate is NG. Position at $ is space when excluding those. ##: Number of data of over 100msec. and less than 270msec. When it is over 100, [99] is displayed. When the number is less than 5, we judge it normal. HDD Spin-up time The accumulation value of the Spin-up time of HDD is displayed. Spin-up time of HDD is displayed. (The unit of display is hour.) Press [3] [3] in service mode.
24
|
|
|
> |
|
