|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Quick service response. A useful and very rare service manual with all details. I recomend this service.
;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
;
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
 ;
Complete and very useful. Could have benefited from a little higher resolution on the schematic and layout diagrams for improved legibility.
DMR-EH60PC / DMR-EH60PL / DMR-EH60GT
9 Taking out the Disc from RAM-Drive Unit when the Disc cannot be ejected by OPEN/CLOSE button
9.1.
9.1.1. 9.1.2.
Forcible Disc Eject
When the power can be turned off. When the power can not be turned off.
1. Turn off the power and press [STOP] [CH UP] keys on the front panel simultaneously for 5 seconds.
1. Press [POWER] key on the front panel for over 10 seconds to turn off the power forcibly, and press [STOP] [CH UP] keys on the front panel simultaneously for 5 seconds.
9.2.
When the Forcible Disc Eject can not be done.
1. Turn off the power and pull out AC cord. 2. Remove the Top Cover. 3. Remove the Front Panel. 4. Remove 4 screws and Upper Base Unit from DVD-RAM Drive. 5. Take out the disc and put the Opener Roller on fully position for direction of Arrow. 6. Put the Upper Base Unit so that the Opener Roller is inserted into the groove. 7. Check Opener Roller is seen through the Opener position Checking Hole, and tighten 4 screws.
12
|
|
|
> |
|
