|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good scan quality, only PC Board scan not enough contrast.
;
First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
 ;
Good service manual. I gat all I want. Copy is good, but could be better. All clear and useful. I sincerely recommend.
;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
;
Welcome. The scheme is clearly helped me to repair. Worth to download it.
1-3-2. Search Dial Block Replacement
1. Remove the four screws (PWH3 x 8). 2. Remove the two hooks, then remove the search dial bracket.
Screws (PWH 3 x 8) Screws (PWH 3 x 8)
1-3-3. Fuse Replacement
The PSW-38 board and SCS-21 board mount the fuse. The fuse blows when an overcurrent flows in equipment under abnormal conditions. n Use the fuse described below in replacement. Remove a foreign substance in the unit that causes a short-circuit before replacing the fuse. Be sure to turn off the power switch before replacing the fuse.
Search dial bracket
Part No. Hook 1-576-231-41 1-576-212-21
Name H.B.C fuse 4 A 250 V (PSW-38 board) Chip fuse 1.25 A 125 V (SCS-21 board)
Housing (upper) assembly
(PSW-38 board) 1. Remove the housing (upper) assembly referring to 1-31, �Cabinet Removal�. 2. Remove the fuse (s) from the fuse holder (s) and replace it (them) with the new fuse (s).
Fuses
3. Remove the rubber knob. Remove the screw (K2.6 x 6), then remove the search dial knob. 4. Remove the blind plate. 5. Remove the three screws (BVTP3 x 8), then remove the search dial block. 6. Install a new search dial block in the reverse procedures of removal.
PSW-38 board
Rubber knob
Housing (upper) assembly
Search dial knob
Screw (K 2.6 x 6)
Blind plate
Screws (BVTP 3 x 8)
Search dial bracket KY-340 board
1-4 (E)
DNE-50
|
|
|
> |
|
