|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
5
6
Insert the tweezers in the space between U_Cover Assy and CSF Cover_L, remove the CSF Cover_L. Next, pull out FAN cable from the connector of power supply.
Insert the tweezers through the opening of lower part of left side of U_Cover Assy and move tweezers in the direction of the arrow until clicks. And remove U_Cover Assy.
2.2
Detaching of Main_PCB
1
2
Remove the DC_Tape from the connector on the Main_PCB side and the screw-driver is inserted from the hole shown in Figure.
Remove the screw (M3*L6TP) in the place of the arrow.
EM26522.DOC 7/71
|
|
|
> |
|
