The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
Text excerpt from page 78 (click to view)
11. TAB PAPER MODE (Cont.)
1 2 3
2
Press the TAB EXTENSION key.
3
4 5 6 7 8 9 10
Press the CASSETTE key (or the BYPASS FEED key), then adjust the tab extension (tab width) and the shift width then press the SET key.
- Adjust the tab width and the shift width by means of the 0mm key and the 30mm key.
The initial settings are set to 13mm (0.51�) for the tab width and the shift width. You can change the initial setting (default *25.4mm = 1� setting) on the User Selection ( Page 5-19). The range of the tab width/the shift width Drawer Bypass Tab width 12 to 17mm (0.4� to 0.6�) 10 to 20mm (0.4� to 0.7�) Shift width 0 to 30mm (0 to 1.1�) 0 to 30mm (0 to 1.1�)
Tab width
Original scale
Measuring the tab width / the shift width The tab width and the shift width can be measured on the original glass. Place tab paper for measuring the tab width and place original for measuring the shift width on the original glass as indicated on the right. The marks of the original scale have a 2mm pitch. Measuring the tab width (Place tab paper)