|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Chapter 13: Using the Effects
6. Press the [MASTER] key and adjust the Send Master 1 level. Leave the level to 100 (default). Fine-adjust the level later while playing the DPS16.
7. Set the FX1�s Bus parameter to �ON�. Now the signal output from the FX1 (the reverb sound in this example) is sent to the ping-pong bus and mixed with the original dry sound from the TRACK MIX channels.
8. Adjust the Effect Return 1 level in the same screen. The Effect Return 1 parameter determines the return level (the level of signal sent from FX1 to the ping-pong bus). Leave the level to 100 (default). Fine-adjust the level later while playing the DPS16.
ºNOTE : The Bus and Effect Return 1�4 parameters on this screen are the same as the Bus and
fields on the Effect screen.
Level
9. Assign the ping-pong bus L/R signals to tracks 15 and 16 in Quick Patch mode. The original dry sound from TRACK MIX channels 1�8 is mixed with the FX1�s effect sound in the pingpong bus, then sent to tracks 15 and 16.
<ex. Ping-pong bus L/R signals are assigned to tracks 15 and 16.>
152
|
|
|
> |
|
