|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Station Preset Memory
Putting a station in the memory.
Preset Tuning
Recalling the stations in the memory.
1 Select the band
Push the Control knob towards [FM] or [AM].
1 Select the band
Push the Control knob towards [FM] or [AM].
2 Select the frequency to put in the memory
Push the Control knob towards [4] or [¢].
2 Recall the station
Press the desired [1] � [6] button.
3 Put the frequency in the memory
Press the desired [1] � [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] � [6] button.
Frequency Step Setting
Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz.
1 Turn the power OFF
Press the [SRC] button for at least 1 second.
Auto Memory Entry
Putting a station with good reception in the memory automatically.
2 Switch the frequency step
While pressing the [1] and [5] button, press the [SRC] button. Release your fingers from the button after the display appears. The frequency step changes to FM band 200 kHz, and AM band 10 kHz.
� When the same operation is repeated, the frequency step returns to the original setting. � When the frequency step is changed, the frequencies in the memory are deleted.
1 Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2 Enter Menu mode
Press the [MENU] button for at least 1 second. "Menu" is displayed.
3 Select the Auto Memory Entry mode
Push the Control knob towards [FM] or [AM]. Select the "A-Memory" display.
4 Open Auto Memory Entry
Hold down on [4] or [¢] of the Control knob for at least 2 seconds. When 6 stations that can be received are put in the memory, Auto Memory Entry closes.
English |
15
|
|
|
> |
|
