|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good information with clear drawings. Thanks!
 ;
The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
;
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
1-2-4. Front (R), Front (L) and Jack PC Board (1) Remove the top cover. (Refer to item 1-1-1.) (2) Remove front panel. (Refer to item 1-1-2.) (3) Remove two pieces of tape (1). (4) Remove six screws (2), four claws and the stay (3). (5) Remove three screws (4) to remove the front (R) PC board (5). (6) Remove two screws (6) to remove the front (L) PC board (7). (7) Remove four screws (8) to remove the jack PC board (9). (Note) After replacing, tape on two points (1) as they were.
Stay (3) Front (L) board (7) Screws (8) Jack PC board (9) Tape (1) Screws (2) Screws (6) Tape (1) Claws Screws (4)
Claws Front (R) board (5)
Fig. 2-1-10
|
|
|
> |
|
|
Parse Time: 0.216 - Number of Queries: 133 - Query Time: 0.047
