|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
3.1.3 Remove the mechanism assembly (See figure 5) � Prior to performing the following procedure, remove the cover. � There is no need to remove the front panel assembly. (1) Disconnect the socket wire from connector CN451 on servo control board. (2) Disconnect the card wire from connector CN2201 on digital board. (3) Remove the four screws C attaching the mechanism sembly.
top
Mechanism assembly Digital board C C
the the as-
CN2201 C
3.1.4 Remove the digital board (See figure 6, figure 7) � Prior to performing the following procedure, remove the top cover. (1) Disconnect the card wire from connector CN2201 on the digital board. (2) Remove the four screws D and E attaching the digital board. (3) Remove the one screw F attaching the jack board. (4) Lift the digital board up, and remove it. Then, the digital board is removed from the connectors CN4101, CN4102 on the main board. In attaching the digital board, insert the connector on the digital board in these connectors securely.
CN451 Fig.5 E
C
Jack board
F
D
D
Digital board Digital board
E
CN2201 Fig.6 CN4102
CN4101 Main board Fig.7
1-8 (No.XA019)
|
|
|
> |
|
