|
Who's Online
There currently are 5395 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I am very happy regarding the online purchase of this manual from Owner-Manuals.com as with this I could set right my Denon CD player and Amplifier.
I once again sincerely thank them for the prompt service which was rendered to me.
N. Shanker
;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
DRM-1004, DR-R102
� Connections
Personal Computer (DOS/V Machine)
SCSI Cable Set the SCSI ID to "0".
+5V and +12V
DC Power Supply
CD-R DRIVE UNIT (DR-R102)
� Preparations
� Set the SCSI ID to "0". � Turn on the power to the drive, insert the destination disc in clamp-up state, manually clamp the disc and short-circuit the changer interface connector (CN502: pins 4 and 5). When stopping, reverse this procedure.
WIFB BOARD ASSY
Short-circuit
CN502
5
GND
4
XCLAMP
Rear
Note: Be sure to execute the diagnostic program always in DOS mode. The DOS window of Windows is unstable with the diagnostic program.
Test 1: Checking the playback performance of a pressed disc (Test item: CDT-304)
� Disc to use Test disc CDT-304 � Test contents Test Items
Number of C1 errors at the inner and outer peripheries Full-stroke seek time Random read time Transfer rate
Standard Values
Less than 22/second (The number of C2 errors is regarded as a reference.) 300 ms or less 210 ms or less 2700 Kbytes/s or more
� Check method Select "CDT-304" and execute it by pressing the "Space" key (takes approx. 1 minute). If all the items are within the standard value range, "OK" is displayed. (If any are out of the standard value range, "NG" will be displayed, and a warning will sound. Press the "Escape" key to cancel.)
20
|
|
|
> |
|