|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
 ;
Quick site processing. A complete and very useful manual with all details. Thank you!
;
Das Service Manual war von der ersten bis zur letzten Seite sehr informativ und hilfreich. Die Darstellung aller Teile war klar und der Text gut lesbar.
Vielen Dank, das war nicht der letzte Download bei ownner-manuals.com.
;
It's a grate service manuals.Have many details and the writing it's so clear.You have all you want in manual,nothing missing,belive me.I'm verry satisfied of this manual.
;
Great scanned service manual
Usefull informations.
I will buy again!
Best Regards
General Adjustment
Item
Screen Image
Adjustment Procedure 1) Receive NTSC Cross Hatch signal. 2) The Screen mode should be selected on Full mode. 3) When the vertical lines of the left and right side is not straight but distorted in the S type, adjust Side Pin S to correct the unbalanced vertical lines.
Side Pin S
Trapezoid
1) Receive NTSC Cross Hatch signal. 2) The Screen mode should be selected on Full mode. 3) When the screen shape is not rectangular but trapezoid, adjust Trapezoid to correct the unbalanced shape.
Side Pin Balance
1) Receive NTSC Cross signal. 2) The Screen mode should be selected on Full mode. 3) When both the left and right screen shape is not symmetrical but on one side, adjust Side Pin Balance to correct the unbalanced shape.
H Duty
1) There is no need to adjust. 2) Check if the value of data is "31".
Parallelogram
1) Receive NTSC Cross Hatch signal. 2) The Screen mode should be selected on Full mode. 3) When both the left and right screen shape is on one side, adjust Parallelogram to correct the unbalanced shape.
400Vp-p
H Focus Phase
1) There is no need to adjust, and check if the value of data is "32". 2) Check that the focus on the right and left side is clear.
900Vp-p
60HZ
15
|
|
|
> |
|
