|
|
|
Who's Online
There currently are 6009 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Menu Setup
A menu is provided to set up the operating conditions of the unit. Menu items include basic items, items about the optional boards, items about the front panel, etc.
For more information about menu items, see � Menu List� (page 12).
4 5
To change the parameters of other items, repeat steps 2 and 3. Press the ENTER button. The changed parameters are saved in the current bank. The contents of the current bank are saved even after the power is turned off. To cancel changing parameters Press the MENU button before pressing the ENTER button.
A �current bank� and 8 �menu banks� are provided with the unit. The current bank can be used to store current parameters. The menu banks can be used to store up to 8 sets of parameters. Saving/recalling frequently used parameters in/from menu banks allows faster setting up of the unit�s operating conditions.
6
Press the MENU button. The back lighting for the MENU button turns off, and the unit exits the menu.
Initial Display
Switching the power on causes the selected parameter of �15: IF OUT LEVEL� and �16: CARRIER� on the menu to appear in the display window.
To return the contents of the current bank to the factory setting
Follow the procedure below.
Changing the Parameters
Follow the procedure below to change the parameters and save them in the current bank.
1
Press the MENU button. The back lighting for the MENU button lights up, and the menu appears in the display window.
1,6
INPUT SEL ALOG SDI AUDIO SDI AEB/EBU REF IN1 IN2 VIDEO STD EXT 525 625 FREQ BW 36M 18M FEC RATE 7/8 ENTER 3/4 ALARM MENU ITEM
2,4
RESET
2 3
Select �93: FACTORY SET� using the ITEM � or µ button. Press the ENTER button. The contents of the current bank return to the factory setting. To cancel returning to the factory setting Press the MENU, ITEM � or µ button before pressing the ENTER button.
5
1
Press the MENU button.
3,4
The back lighting for the MENU button lights up, and the menu appears in the display window.
4
Press the MENU button. The back lighting for the MENU button turns off, and the unit exits the menu.
2 3
Select a menu item to be changed using the ITEM � or µ button. Change the parameters using the 4 or $ button. Use the � or � button to move a digit to the left or right.
10
|
|
|
> |
|
