|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
;
very good quality readable manual,printed off very well.
;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
5. To check the 3 Pin I/F After pressing � 7 � button, the following menu appears on the LCD.
PX-653 TEST Program Ver.2.21
7....RS-232C I/F Set the H/T on the I/O box. Select the I/F switch to 3 pin SIF. Press � Enter � key. This test is executed o n c e . In case you want to check this continuously, select aging test at test mode menu.
Set the H/T(DT-9000) , I/O box (DT-9060I/O) and loop back connector as follows;
Loop back connector
6. AGING TEST This test can be check the RS232C I/F and 3 pin I/F. When you select the aging test at test mode menu, you can check the I/F continualy. Each preparation is same for individual test.
�8�
|
|
|
> |
|
Home
