|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I used it to repair a NAD 7030, but unfortunately, the 7045 is different !
But documentation was useful.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
ALIGNMENT INSTRUCTIONS
3. VERTICAL SIZE
* The VERTICAL CENTER adjustment has to be done in advance. 1) Apply a RETMA PATTERN Signal. 2) Set the TV to Normal I mode. 3) Adjust the VERTICAL SIZE of the picture with the select V.size by volume UP/DOWN keys.
4. VERTICAL S-CORRECTION ( Fixed : Adjust if need be )
1) Apply a CROSSHATCH PATTERN Signal. 2) Adjust the S-CORRECTION to obtain the same distance between horizontal lines with the S.Curve by volume UP/DOWN keys.
5. HORIZONTAL CENTER
1) Apply a RETMA PATTERN Signal. 2) Adjust picture centering with the select H.Center by volume UP/DOWN keys.
EW 1. WIDTH
1) Apply a RETMA PATTERN Signal. 2) Adjust the horizontal width to make a perfect circle with the select H.Width by volume UP/DOWN keys.
2. PARA
1) Apply a CROSSHATCH PATTERN Signal. 2) Adjust the vertical line to straight with the select E.W Para by volume UP/DOWN keys.
3. CORNER ( Fixed : Adjust if need be )
1) Apply a CROSSHATCH PATTERN Signal. 2) Adjust the vertical line to straight with the select EW.Cor T by volume UP/DOWN keys.
1) Apply a CROSSHATCH PATTERN Signal. volume UP/DOWN keys.
4. SYMMETRY ( Fixed : Adjust if need be )
2) Adjust the symmetrical balance to be suitable with the select EW Sym by
8
|
|
|
> |
|
