|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete original Service Manual in good (scan) quality!
;
Very good manual. Plenty of service information including alignment instructions. Clear circuit diagram. Excellent, thank you.
 ;
Good morning, the service manual you sent me was perfect.
Your service and answering are excellent.
I recomend this service.
Best regards.
;
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
;
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
ALIGNMENT INSTRUCTIONS
5-3. HORIZONTAL CENTER ADJUSTMENT 1) Pattern : PAL B/G Retma 2) Choose the �H-CENTER� using the Pr-Up/Down Keys. 3) Adjust the vertical line of picture to coincide with the mechanical center marks of the CRT using the Vol-Up/Down Keys. 5-4. HORIZONTAL SIZE ADJUSTMENT 1) Pattern : PAL B/G Retma 2) Choose the �H-SIZE� using the Pr-Up/Down Keys. 3) Set each side over scan to be 10% using the Vol-up/Down Keys. 5-5. PINCUSHION ADJUSTMENT 1) Pattern : PAL B/G Crosshatch 2) Choose the �PARABOLA� using the Pr-Up/Down Keys. Adjust parabola width to fit on screen. 3) Choose the �CONER� using the Pr-Up/Down Keys. Adjust coner parabola to fit on screen. 4) Choose the �TRAPEZIUM� using the Pr-Up/Down Keys, Adjust trapezium to fit on screen. 5-6. S-CORRECTION ADJUSTMENT 1) Pattern : PAL B/G Crosshatch 2) Choose the �S-CORRECTION� using the Pr-Up/Down Keys. 3) Adjust each distance of horizontal line to be the same using the Vol-Up/Down Keys. 5-7. SUB-BRIGHTNESS ADJUSTMENT 1) Pattern : PAL B/G Retma 2) Press the NORMAL Keys to set the �NORMAL 1� mode. 3) Adjust the Brightness so that the second line of top appears, as follow.
-6-
|
|
|
> |
|
