|
Who's Online
There currently are 5901 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Nice manual. Clear copy and very rare, to boot. Great price, too!
;
Excellent service manual. Complete service info. with schematics, step-by-step instructions and illustrations. Well worth the price!
;
Great product, helped me to restore vintage walkman cassette.
Just some pictures could be little bit more sharp and contrast
Thank you
;
I love older radio's and the service manuals that are sometimes hard to find. Was able to find a manual quite easily on this site.
;
Thank you for your shop manual! Your help was very useful - the device is repaired! Once again - Thank you! I wish you a successful business! Edward (Russia).
5. PICTURE ADJUSTMENTS
5-1. SUB-BRIGHTNESS ADJUSTMENT 1) Pattern : PAL B/G Retma 2) Press the key to set the "STANDARD" mode. 3) Choose the "DP" using the � UP� � DOWN�keys. PR , PR 4) Check the Color 34step, the Tint 32step. 5) Maximize the Contrast. 6) Adjust the Brightness so that the second line of top appears , as follow.
2nd line
5-2. PIP SUB VIDEO LEVEL ADJUSTMENT 1) Pattern : PAL B/G Color Bar 2) Press the � S11�key of Service Remocon to set the "2-Picture" mode. 3) Press the � SERVICE�key of Service Remocon to cancel the "MENU" mode. 4) Connect the probe of Oscilloscope to PP01 of "Sub Video out". 5) Turn the RP14 of PIP PCB to make the voltage to be 1Vp-p. 6) Press the � S11�key of Service Remocon twice to cancel the "2-Picture" mode. 5-3. PIP Y, U, V LEVEL ADJUSTMENT" 1) Pattern : PAL B/G Color Bar 2) Press the � S11�key of Service Remocon to set "2-Picture" mode. 3) Press the � SERVICE�key of Service Remocon to cancel the "MENU" mode. 4) Connect the probe of Oscilloscope to "Y out" of PP02. 5) Adjust the RP11 to make the voltage of Main Y coincide with the Sub Y. 6) Connect the probe of Oscilloscope to of "U out" of PP02. 7) Adjust the RP13 to make the voltage of Main U coincide with the Sub U. 8) Connect the probe of Oscillocope to "V out" of PP02. 9) Adjust the RP12 to make the voltage of Main V coincide with the Sub V. 10) Press the � S11�key of Service Remocon twice to cancel the "2-Picture" mode.
- 10 -
|
|
|
> |
|