|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Fast Download,all pages present,an excellent copy.THis enabled to find the origional part numbers and chase them up. The cartridge is proving difficult to find but at least I know the origional part number.Thanks to all.
;
The manual was as described. Complete with parts list and technical information. Fast delivery.
 ;
Simple and fast...
The diagrams are clear and legible; i have been a great help.
The site is very reliable and precise thanks.
;
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
;
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
5. PICTURE ADJUSTMENTS
5-1. SUB-BRIGHTNESS ADJUSTMENT 1) Pattern : PAL B/G Retma 2) Press the key to set the "STANDARD" mode. 3) Choose the "DP" using the � UP� � DOWN�keys. PR , PR 4) Check the Color 34step, the Tint 32step. 5) Maximize the Contrast. 6) Adjust the Brightness so that the second line of top appears , as follow.
2nd line
5-2. PIP SUB VIDEO LEVEL ADJUSTMENT 1) Pattern : PAL B/G Color Bar 2) Press the � S11�key of Service Remocon to set the "2-Picture" mode. 3) Press the � SERVICE�key of Service Remocon to cancel the "MENU" mode. 4) Connect the probe of Oscilloscope to PP01 of "Sub Video out". 5) Turn the RP14 of PIP PCB to make the voltage to be 1Vp-p. 6) Press the � S11�key of Service Remocon twice to cancel the "2-Picture" mode. 5-3. PIP Y, U, V LEVEL ADJUSTMENT" 1) Pattern : PAL B/G Color Bar 2) Press the � S11�key of Service Remocon to set "2-Picture" mode. 3) Press the � SERVICE�key of Service Remocon to cancel the "MENU" mode. 4) Connect the probe of Oscilloscope to "Y out" of PP02. 5) Adjust the RP11 to make the voltage of Main Y coincide with the Sub Y. 6) Connect the probe of Oscilloscope to of "U out" of PP02. 7) Adjust the RP13 to make the voltage of Main U coincide with the Sub U. 8) Connect the probe of Oscillocope to "V out" of PP02. 9) Adjust the RP12 to make the voltage of Main V coincide with the Sub V. 10) Press the � S11�key of Service Remocon twice to cancel the "2-Picture" mode.
- 10 -
|
|
|
> |
|
