|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thank you very much for the manual. It is what I needed and it will be very helpful to me. The delivery of the manual was easy and very fast. I strongly recommend this site to other users. Best regards.
 ;
Excellent!! Got what I need and very fast!! Thank You
;
Manual acquired with good resolution, complete in all its pages, very good policy of the folder where are saved all products purchased.
;
Service manual very complete and clear. It was very helpfull for my work.
;
This is the 2nd time I download manuals from this website and I can say it's what I was expecting. It contains schematic, layout (decent quality), short description, parts and dissasembly instructions. I recomend it for anyone who wants to repair/modify this device.
§ VERTICAL HIGHT ADJUSTMENT
1. Receive the RETMA PATTERN. 2. Set the user control to AUTO PICTURE ON. 3. Adjust the R301 so that the CENTER of circumference of big circle may meet with the upper and lower sides of screen.
4 1 5 3 1 1
4 1 3 5
1 4
1 4
§ WHITE BALANCE ADJUSTMENT
1.Execute HEAT RUN of the TV SET over 30 minutes with SERVICE REMOCON. 2.Connect the signal output of WHITE BALANCE TESTER (Nitsuki 2840) to the ANTENNA (or VIDEO IN) input of the TV SET. Stick and �x the SENSOR to the center position of CRT. 3. Adjust the R,G,B BIAS and G,B DRIVE VOLUME in order that R,G,B of the HIGH and LOW BEAM may meet with the CENTER LED of each measuring instrument. 4. At this time, the memorized coordinates of the WHITE BALANCE TESTER, unless otherwise speci�ed, use following coordinates and color temperature (PAL:9600K 3~5ftL 265¡¿295 , NTSC: 10850K 3~5ftL 274¡¿289)
§ SUB-BRIGHT ADJUSTMENT
1. Receive the RETMA PATTERN. 2. Set the user control to AUTO PICTURE ON. 3. Turn the SUB-BRIGHT CONTROL VOLUME (R540) and adjust the gradation pattern as shown. 4. The status that the border between 15% and 20% can be distinguished.
9
|
|
|
> |
|
