|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Good service manual,i saved from scrapping this deck,is now fully functional.Thanks.
 ;
Found this to be the manual included with the original packinging, was helpfull but did not give any detailed repair instructions.
;
Complete service manual, was very helpful in repairing this tapedeck.Thanks.
;
The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
;
Good,readable manual. I found other manuals that were not readable when it came to part ID, but the one downloaded from owner-manual.com was better than expected. I will do buisness with owner-manual.com again.
GB
1.MAINTENANCE INSTRUCTIONS
For service information on the deck mechanism see separate publication<DTH6000 SERIES MECHANICAL ADJUSTMENTS>.
1.1 Resetting the video recorder
a) Disconnect the video recorder from the mains supply. b) Hold down the <+> and <-> keys on the front panel and reconnect the video recorder to the mains supply. Release the <+> and <-> keys. c) Resetting the video recorder also can be done in the service mode.
1.2 Service mode adjustments
Accessing the service mode a) Press <menu> key on the remote control, then the summary menu is displayed on screen. b) Sequential pressing the numbers as <3> ,<6>, and <9> will display the 5 items of service mode. c) Each service mode can be accessed by pressing the digit key corresponding to the number on the left side. <0> key on the remote control will release the service mode.
1.3 Head switching point
a) Insert a protected test cassette into the video recorder. The VCR will automatically enter the play mode. b) Next enter the service mode as described above. c) Press <5> key on the remote control, then the video control data is displayed. d) Press <Rec> key either on remote control or on the front panel. <0> key on the remote control will release the video control data mode.
Don�t reset in the Service mode. In case of reset, regional code will be changed, from 2 to 1
5
6
|
|
|
> |
|
