|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I Recently purchased yet another Service Manual from Owner-Manuals.com, this time for a Sony EVS700ES/UB Videocassette Recorder. The Manual was available for upload within two hours and is an Extremely Good copy, as some of this I was able to enlarge to get even better detail.
Once Again, Very happy with the result!
 ;
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
;
The quality of the manual is top. The transfer worked perfect and fast.
No problems at all. Recommendable
;
Very good service for get any documentation. Fast and perfect quality.
;
Excellent service manual with all the necessary info. :)
6. GEOMETRY 6.1 VERTICAL CENTER
1) Set the TV to � NORMAL I�mode. 2) Enter the service mode. 3) Locate the cusor at � V.CENTER�then press � VOL +� or � VOL -�keys to adjust the center line with the mechanical center marks of the CRT.
6.2 VERTICAL SIZE
* The VERTICAL CENTER adjustment has to be done in advance. 1) Receive the Retma pattern. 2) Set the TV to � NORMAL I�mode. 3) Enter the service mode. 4) Locate the cursor at � V.SIZE�then press � VOL +� or � VOL -�keys to adjust the upper part of the picture.
6.3 HORIZONTAL CENTER
1) Apply a RETMA PATTERN signal. 2) Set the TV to � NORMAL I�mode. 3) Enter the service mode. 4) Locate the cursor at � H.CENTER�then press � VOL +� or � VOL -�keys to adjust the picture centering.
if EEPROM(I702) has been changed; - Option data has to be change and - all alignment function has to be readjusted * The initial state of adjustment are as follows; - V-Center, V-Size, H-Center, R, G, B, AFT = Center ( - AGC = * Service Remocon )
|
|
|
> |
|
