DAEWOO DTQ-14D7SS
Service Manual

MODE SVC2 SVC5

ADJUSTMENT MAX Screen Adjustment VIDEO LEVEL RF AGC DELAY FM LEVEL AGC POINT H.PHASE H.SIZE P.CUSHION V.POSI V.SIZE V.LIN V.S TILT TOP.C BOT.C V.SIZE.C ABL.POINT BK.LEVEL BK.START BRI.STOP Y.CORING PRE.SHOOT DC.REST W.PEAK FRESH OSD.GAIN OSD.GRAY OSD.SW HT.SW HT.LEVEL C.BPF C.KILL RB.ANGLE G.ANGLE C.EXT FILTER TRAP.TEST CORING.GN H.SIZE.CP R.DRIVE G.DRIVE B.DRIVE R.BIAS G.BIAS B.BIAS SCR R-BIAS SCR G-BIAS SCR B-BIAS SCR R-DRIVE SCR G-DRIVE SCR B-DRIVE SCR BRIGHT SUB BRIGHTNESS CONTRAST TINT COLOR SHARPNESS FM/AM PRE SCART PRE MONI VOL H.B.R H.B.L H.BLK.SW AFG&G H.FREQ V.SEP V.COUNT Internal Black Internal 100% White Internal 60% White Internal Cross Pattern Forwarding Mode 7 63 31 31 63 63 63 127 31 31 63 15 15 7 7 3 3 1 1 3 3 1 1 3 1 1 1 3 1 7 15 1 1 7 7 3 7 127 15 127 255 255 255 255 255 255 127 15 127 127 127 28 77 27 13 127 127 127 7 7 1 1 63 1 1

DATA INITIAL 7 10 20 3.75 15 32 32 30 35 12 14 (8) 38 8 8 7 0 3 1 0 0 3 3 1 0 0 0 0 1 0 0 0 0 0 1 (0) (1) 0 3 4 65 10 75 127 127 127 0 127 0 64 10 64 80 (100) 70 27 40 (32) 15 (27) 13 45 (55) 45 (55) 60 (36) 4 5 1 1 36 0 0

REMARKS

Align RF AGC threshold Select AGC reference voltage Align sync flyback pulse, using internal cross pattern(s11) Fixed Fixed Align Vertical DC Bias, using internal cross pattern(s11) Align Vertical Amplitude, using internal cross pattern(s11) Align Vertical Linearity, using internal cross pattern(s11) ( ) is 20 inch default value Fixed Fixed Fixed Fixed

SVC6

SVC7

SVC7-2

( ) is 220NS default value ( ) is 220NS default value

SVC8

SVC-8

( ) is 220NS default value Align common RGB DC level ( ) is 220NS default value ( ) is 220NS default value ( ) is SSP default value. ( ) is SSP default value. ( ) is SSP default value.

SVC9

SVC10

SVC11 SVC12

Display Internal Black Pattern Display Internal 100% White Display Internal 60% White Display Internal Cross Pattern Factory Initialization

6