The service manual was very usable and clear enough to see the individual values of all of the components (unlike some of the service manuals I have gotten in the past from web sites similar to this one). The price was right and the information was greatly appreciated. It helped me with an otherwise very difficult repair. It was much needed and appreciated. A faster turn around on my order would be nice, but I understand the constraints on your staff's time. Thank you for your service.
Great service!!! Polecam gorąco wszystkim zainteresowanym
Text excerpt from page 20 (click to view)
5) Drive circuit The STR-S5707 applies the proportional drive system in order to minimize turn-on and saturation loss, and storage time. In the conventional RCC system, turn-on loss and switching noise due to the surge current appearing when the power transistor turns on are high as because the transistor is driven by the drive current shown in FIg. 10-1. In addition, since is decreases linearly when the transistor turn off and a peak value of lB2 is not large, the storage time is long and the VCE(SAT) voltage is high, which results in large turn-off loss. The circuit and the waveforms of the proportional drive system which is applied to the STR-S5707 in order to reduce these switching loss and shorten the storage time are shown in Fig. 10-2 respectively.