|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
- Connect the �VCR� SCART socket of your digital receiver to the EXT2 SCART socket of your VCR (called �IN�) using a SCART lead. - Connect the EXT1 SCART socket of your VCR (called �OUT�) to the EXT2 SCART socket of your TV using a SCART lead. - Plug all your equipment, excluding your digital receiver, into the mains. - Switch on your TV set and select a channel. - Plug your adapter into the mains.The welcome screen appears, then the First installation screen (the LED is lit in green). - Read the Quick installation guide to proceed with the channel scan if not already done. With this connection set up: � You can watch digital TV while you record analogue TV. � You can watch analogue TV while you record digital TV. � You can record the digital TV channel you are watching. Some VCR or DVD recorders need to be in standby to use the Easy Record feature. Refer to your VCR or DVD User manual.
EN
VCR or DVD settings
- Depending on your VCR or DVD brand and type, you have to set the VCR recording control option to �Prepare Record� or �Record Link�. Refer to the VCR or DVD User manual or try the two options to find out which is most suitable. - Set your VCR or DVD to the mode allowing control by your digital receiver.
Recording with the VCR control feature
- Your digital receiver,TV and VCR or DVD are connected and set according to the diagram. - You have programmed a timer on your digital receiver as described in paragraph Timers Manager. - At timer start, your VCR or DVD starts recording and at timer end, it stops recording under the control of your digital receiver.You no longer need VCR or DVD programming to record digital TV channels.
27
|
|
|
> |
|
