This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Fast and courteous service. Product delivered as described. Thank you.
Text excerpt from page 9 (click to view)
3UTTONS
ADD A DISH SIGNAL LIGHT
CLEAN SIGNAL
LIGHT
WATER HEATING HOLD SIGNAL LIGHT
CY �CLE CONTROL
KNOB
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cookedor baked-on foods. Timer delays while the dishwasher automatically heats the water to 145°F (63°C) in both washes and the last rinse (marked �1. Cycle time will be about 1% to 2 hours, depending on time needed to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled loads. Cycle time is about 60 minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads. (The Energy Guide Label data is based on this cycle.) Cycle time is about 55 minutes.
LOW ENERGY WASH Cycle
For pre-rinsed loads. Cycle minutes. or lightly soiled time is about 50
RINSE & HOLD Cycle
For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes. Use AIR DRY only. Do not use HI-TEMP WASHING Option.
The CLEAN Signal Light
The CLEAN Signal Light will come washing cycle is complete. on when a To turn light off, turn the Control Knob clockwise slightly until the light goes off.
