|
There are currently no product reviews.
 ;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
;
Very good scanning quality. All schematics are very legible. Worth every cent !
;
Excellent quality, very quick download turnaround, will definately use again.
1
2
3
4
Removing the Traverse Mecha. Assy-S and Pickup Assy-S
A
1 Bridge and Tray
1 2
Remove the bridge by removing the one screw. Pull out the tray, then remove it by pressing the hook.
Hook
2
-1
B
1
Bridge
-1
1
-2
C
Tray
2
D
-2
Note when reinserting the Tray
When reinserting the tray, first align the triangle printed on the loading base and the pin of the drive cam, then insert the tray.
Drive cam
Pin
E
Front Side Loading base Triangle
F
68
1 2
DV-2750-S
3 4
|
